• Paddle cradles w/15mm straps keep your board safe and secure, easily removed when not needed • Shortboard rack features strong extruded aluminum clamp with durable anodized finish • Fist most bikes with seat post diameters of 25-32mm diameter and carries most surfboards up to 8' in length • Longboard rack with adjustable-length arms fit most 26" wheel bikes, lightweight alloy construction, 25kg/55lb capacity • Longboard rack fits most surfboards up to 10' in length (not designed for stand-up paddleboards) • Rust-resistant hardware
Get it to go with Portland Design Works' Takeout Basket. This handsome rack attaches to your handlebars for easy access to the included waterproof, removable roll-top bag. The rack is made from light, sturdy aluminum tubing and includes thoughtful features like an eyelet for mounting a light and a slot for carrying your u-lock (both sold separately). - Conveniently carry a six pack of bottles, five burritos, three chinchillas or an extra layer of clothing - Fits 25.4 - 31.8mm handlebars (even fits between drop bars) - Includes water resistant roll top bag that clips securely into basket - Eyelet for attaching light mount - Integrated u-lock carrying slot - Rugged, lightweight 10 mm alloy tubes - Rack weight: 500 grams - Inside of basket dimensions: 155mm x 255mm x 105mm - Lifetime PDWarranty
Patented rack attachment system works on virtually any bicycle from full-suspension mountain bikes to commuters and everything in between. - Patented attachment system secures easily - Tough construction allows for variety of rugged riding uses - Silent and vibration free performance - Includes rails for mounting panniers - Works on the rear seat stays and front fork - Works with any type of frame material
Jandd Extreme Front Mount Rack is the only equipment to reach for when front panniers are a necessity. - All stress points are double-welded - Height (Overall): 16.75 inches - Height (Pannier Mounting): 12 inches - Width: 6 inches - Length: 13.5 inches - Weight: 1055 grams - Weight limit: 40 pounds
Jandd Expedition Rear Mount Rack is the rack of choice for cyclists who require exceptional durability and expanded size, measuring a full three inches longer than the Jandd Standard Rack. - Fits up to 700c wheels - AL-6061 construction - Has angled third strut and double welds at stress points - Weight: 1000 grams - Platform dimesions: 6 x 16.75 inches - Rack weight limit: 75 pounds
Strong and svelte, the Everyday Rack from Portland Design Works mounts to frames with or without eyelets and will fit around wheels and tires up to 29x2.4". The handsome bamboo platform is slightly tapered, giving the Everyday Rack a light, racy feel that looks great on a wide range of frame styles. The lower mounting bars allow panniers' center of gravity to be closer in line with your wheel, improving rear-end stability even when hauling heavy loads. Additionally, it means the platform is easily utilized, even when riding with two panniers. The Everyday Rack is crafted from durable alloy tubing, may be mounted to a rear wheel skewer, includes a tail light mounting point and solid, adjustable attachment arms. It's a breeze to install, so you'll be pedaling cargo in no time. Rated for up to 25 kgs (55 lbs). - Strong alloy tubing - Double ply bamboo deck - Deck measures: 209 x 76 mm (8.25 x 3") - Height: 419 mm (16.5") - Weight: 1.6 lbs - Max Load: 25 kgs (55 lbs) - Lifetime PDWarranty
Turn your bike into a touring or commuting beast with this bag-compatible, lightweight front rack that doesn't sacrifice strength or utility. The Lowrider front rack mounts directly to forks with fender eyelets or lowrider mounts to keep a low center of gravity when you load it up with your favorite gear. Includes threaded brackets for accessories. - Can be mounted to lowrider mounts or fender eyelets - Lowrider-style rack for secure and stable pannier mounting -Versatile design accepts lowrider and trunk style bags - Threaded accessory eyelets let you easily mount lights and other essential accessories - Includes hardware kit for mounting to both fender eyelets and lowrider mounts - Max load 33lbs
- Steel tubing - 45 x 38.5 x 8 cm
TerraTrike's custom Low Rider rack is designed to sit behind and below the seat. It allows for attachment of panniers and is also the perfect mounting point for electric assist batteries, lowering your trike’s center of gravity. Designed for use with the Rover, Rambler, and Sportster models. Requires the addition of the appropriate model Fit Kit. Choose a Rambler Fit Kit, Sportster Fit Kit, or Rover Fit Kit (not compatible with Rover x8 model). Features: - Light but strong 6000 series aluminum construction with durable anodized finish - Mounts on many late model TerraTrikes (with additional hardware, sold separately, which is specific to each frame design) - Mounts below and behind the seat allowing you to use previously wasted space - Helps keep center of gravity low for more stability when cornering - Provides a great mounting point for batteries in electric assist conversions
The Portland Design Works Bindle Rack is a seatpost-mounted rack designed to easily haul your gear on multi-day cycling tours or just across town. The rack is constructed of lightweight alloy and mounts to any size seatpost in seconds. Heavy-duty compression straps loop through saddle rails to carry your cargo. The Bindle Rack helps to prevent side-to-side sway while riding and rear wheel rub for riders with short seat posts. Place your tent, sleeping bag, drybag, or other gear directly onto the Rack platform and pull the compression straps tight to secure the load up against the bottom of your saddle. - Rack mount fits seatposts with diameters 22.0 - 31.6mm - Rack deck measures 133 x 343mm (5.25 x 13.5") - Total Rack length: 432 mm (17") - Rack weight: .35kg (13 ounces) - Rated to 5.34kg - Lifetime PDWarranty
You'll be amazed by how much cargo you can transport with your very own Loading Dock. This attractive rear rack from Portland Design Works isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support up to 35 pounds so you can load 'er up with all the essentials. - Lightweight aluminum tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 2 lbs - Rated to 16 kgs (35 lbs)
You'll be able to haul a real payload with this strong rack from Portland Design Works. The Payload isn't just a pretty face, either. Its graceful curving supports and two-ply bamboo deck add strength to support a whopping 77 pounds of cargo. So you can bring everything along for the ride, from a week's groceries to the literal kitchen sink, you know, just in case. - Strong steel tubing - Double ply bamboo deck - Deck measures: 140 x 381 mm (5.5 x 15") - Height: 368 mm (14.5") - Weight: 1360 g (3 lbs) - Rated to 35 kgs (77 lbs)
Add a little cargo-hauling capacity to your road bike with Bontrager's BackRack Lightweight. It's made of aluminum and weighs just 465 grams, so it's perfect for turning your roadster into a fast commuter. It includes rustproof stainless-steel hardware, rear quick-release skewer and a mounting kit. It's also accepts Bontrager's Interchange trunk bags (sold separately).
Jandd Low Front Mount Rack is an optimal choice when touring or commuting exclusively by road or in areas where ground clearance is not an issue. - Height (Overall): 14 inches - Height (Pannier Mounting): 12 inches - Width: 6 inches - Weight: 752 grams - Weight limit: 25 pounds
Lightweight aluminum tubing, stainless steel hardware, and fully adjustable upper stays make the Pork Chop rack a durable addition to any bike. - Fits most 700c cantilever and disc brake bikes - Tubular aluminum construction, 10mm diameter - Stainless steel hardware - Fully adjustable upper mounting brackets - W-bend at bottom of rack for easy on-and-off of hook-style panniers - Platform Dimensions: 10.75 x 4.88" - Weight: 650g - Weight Limit: 40 lbs.
Jandd Standard Rear Mount Rack is designed to fit the needs of all riders. - Fits up to 700c wheels - AL-6061 construction - Platform dimensions: 6 x 14 inches - Weight: 816 grams - Weight limit: 40 pounds
This heavy-duty steel rear rack is made for towing Burley trailercycles. Pick up an extra to easily switch your Piccolo or Kazoo trailercycle between multiple bikes. The Moose Rack includes rack stays and hardware to mount to your bicycle.
Axiom's Journey Uni-Fit MK3 ALU Rack is made of solid, hand-welded 10mm aluminum tubing. The Uni-Fit modular foot design provides adjustable setback and height so the rack is compatible with an extraordinarily wide range of bicycle frames, wheel sizes and geometry types. This rack is specially designed to handle large, heavy panniers (sold separately) with additional looped struts that stabilize the bags and let them mount lower for additional stability.
So versatile, it carries everything but the weight of the world. - Alloy heavy-duty 12mm diameter bars - Carrying capacity: up to 25kg or 55lbs - Stainless steel hardware included - Rear rack designed to be compatible with most Electra 26" wheel models - Rear rack not compatible with Electra 26" Townie Go! 8D
Whether you're commuting, running errands, or need a spot for leftover tacos, this rack makes it easy to carry your essentials. - Alloy heavy-duty 12mm diameter bars - Can hold up to 9.1kg or 20 lbs - Cargo strap included
Designed to complement the clean lines of the Townie collection, the Townie rear rack enhances utility while still looking great. - Interchange Compatible. Perfect Fit for Commuter Rear Rack Bag - Compatible with the Townie 26-inch wheel models 2007 and after - Alloy aluminum rack - Carrying capacity 55lbs (25kg) - Stainless steel hardware included
$17.99 - $61.99
Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds
Bontrager's BackRack Deluxe L is made for mountain and hybrid bikes with frame sizes 18 inches and over, and road bike frames 54cm and over. This durable and light rack is perfect for turning your bike into a commuter and errand-runner. Single-bolt strut mounts allow for maximum adjustablility and ease of installation. Plus, the BackRack Deluxe boasts side rails, making it compatible with standard trunk bags and panniers as well as Bontrager's Interchange models (sold separately).
Bontrager's BackRack Deluxe S is made for mountain and hybrid bikes with frame sizes 18 inches and under, and road bike frames 54cm and under. This durable and light rack is perfect for turning your bike into a commuter and errand-runner. Single-bolt strut mounts allow for maximum adjustablility and ease of installation. Plus, the BackRack Deluxe boasts side rails, making it compatible with standard trunk bags and panniers as well as Bontrager's Interchange models (sold separately).
Add more utility to your Ticino with a specially made rear rack. This aluminum rear rack features a sturdy design and attaches quickly and easily so you can bring along nearly anything your heart desires.
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too.
Topeak's Explorer Tubular Rack is a great add-on for carrying a trunk bag, pannier or anything else you want to strap on. It's made of tubular aluminum, fits most bikes with disc brakes, and has a center strip that acts like a short fender, too. Plus, it comes with a spring that folds up to clamp securely onto books, magazines and other thin objects.
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
Make your fat bike a load-hauling master with Axiom's Fatliner. It's disc compatible, and it's made from rugged 6061 T6 aluminum to keep strength to the max and weight to a minimum. There are plenty of mounting options to accommodate all sorts of fat bikes, and it fits dropouts from 170 to 190mm apart. Get fat, get loaded, and go adventure with the Fatliner.
So versatile, it carries everything but the weight of the world.
Page 1 of 2 Next page