Filter By:

  • Show More Brands
  • Show Fewer Brands

Forks

DVO Emerald Tapered 20-D 27.5
$1,895.00
- Air sprung with adjustable negative coil spring - Twin Tube open bath cartridge damper with Bottom Loader compression unit - Rebound, high and low speed compression external adjustability - Threadless aluminum steerer with 42mm 7000 series aluminum upper tubes - Carbon Torsion Arch increases stiffness by 25% - 36mm lower legs with forged magnesium 20x110mm dropouts - 74mm Post-Mount, 203mm disc brake only
RockShox Pike RCT3 DebonAir 29+
$879.00
The RockShox Pike is like a stealth bomber designed specifically for new-school trail riders. Its new damper rides high in the travel where it’s the plushest. Its industry redefining asymmetric approach to chassis design delivers an unparalleled stiffness to travel to weight ratio that will have other engineers playing catch up for years. The RCT3 Charger 2 Damper with DebonAir air spring delivers increased small bump sensitivity and mid-stroke support. The firm setting has also been re-tuned to better match RockShox rear shocks, with OneLoc compatibility which allows on-the-fly suspension control. - Charger 2 Damper with DebonAir spring - Lighter chassis with signature Pike stiffness - Fast Black coating on the upper tubes provides improved durability and decreased friction - Crown Race: 40mm - Offset: 51mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Wheel Size: 29+ - Stanchion Diameter: 35mm - Maximum Tire Width: 81mm - 29 x 3.0" maximum tire size - Maximum Tire Width: 82 mm
RockShox Pike RCT3 DebonAir 29-inch
$875.00
The RockShox Pike is like a stealth bomber designed specifically for new-school trail riders. Its new damper rides high in the travel where it’s the plushest. Its industry redefining asymmetric approach to chassis design delivers an unparalleled stiffness to travel to weight ratio that will have other engineers playing catch up for years. The RCT3 Charger 2 Damper with DebonAir air spring delivers increased small bump sensitivity and mid-stroke support. The firm setting has also been re-tuned to better match RockShox rear shocks, with OneLoc compatibility which allows on-the-fly suspension control. - Charger 2 Damper with DebonAir spring - Lighter chassis with signature Pike stiffness - Fast Black coating on the upper tubes provides improved durability and decreased friction - Crown Race: 40mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Wheel Size: 29" , 27.5+ - Stanchion Diameter: 35mm - Maximum Tire Width: 81mm - 29 x 2.8" or 27.5 x 3.0" maximum tire size
RockShox Bluto Suspension Fork
$685.00 - $715.00
RockShox started with the features you’ve come to love from them: Fast Black aluminum upper tubes, stout 15mm Maxle, remote or crown adjustable damping, tapered steerer tube, and the infinitely tunable Solo Air spring. Then, the chassis got the fat treatment by re-engineering it to meet the unique needs of fat tires and wheels. Everything from crown, to arch, to axle has been optimized to tackle the increased torsional loads of its wide stance. With more traction and control than ever before, you’ll never be happier you went fat. - TRAVEL: 80/100/120mm - WHEELS: 26-inch - AXLE TO CROWN: 491mm - 80mm travel, 511mm - 100mm travel, 531mm - 120mm travel - WEIGHT: 1796g (3.96lb) - DAMPING: RL - AVAILABLE SPRINGS: Solo Air - ADJUSTMENTS: Crown or remote compression to lockout, rebound - STEERER OPTIONS: Tapered aluminum - CROWN: Forged AL66 TV aluminum - UPPER TUBES: 32mm aluminum, Fast Black - LOWERS: Magnesium - MAXIMUM ROTOR SIZE: 200mm - COLOR OPTIONS: Black, Diffusion Black (OEM only), White (OEM only) - REMOTES: OneLoc - OTHER: Axle: 15x150mm Maxle Lite, Offset: 51mm, Brake Type: Disc
DVO Jade Coil Shock
$585.00
- Compression loader damper unit with bladder for amazing small bump compliance and no stiction off the top - Externally adjustable rebound and high/low speed compression - Shock body cooling fins keep things running cool - Spring and mounting hardware not included, must be purchased separately - Adjustments: high speed compression, low speed compression, rebound, spring preload - 425 grams
3T Luteus Team
$549.99
3T's Luteus Team is an all-carbon cyclocross fork designed for use with disc brakes. It features include a tapered steerer and aluminum-faced fork ends for precise handling and simple wheel changes. It supports brake calipers for use with standard 160mm brake rotors. The left fork blade is reinforced at the brake mounting pillars to compensate for the stresses imparted by disc braking. On its outer face, there is a recessed channel with two integrated fixing points for tidy brake cable/hose management. Plus, the fork ends face forwards and have aluminum inserts to better resist the lateral stresses transmitted through the hub by rough terrain.
Whisky Parts Co. No.9 Carbon Disc Cyclocross Fork w/Fender Mounts
$520.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Carbon Disc Cyclocross Fork. It eliminates uncomfortable chatter and vibration for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, disc brake mounts, and a stiff, secure thru-axle ensure low weight and precise braking and handling. Plus, fender mount means you'll be bounding out the door on even the rainiest days. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 395mm - Brake Mount: Post Mount 140mm - Crown Race: 40 - Front Axle: 15 x 100mm - Material: Carbon - Maximum Tire Clearance: 45mm - Offset: 45mm - Rotor Size: 185mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length: 300mm - Steerer Type: Tapered - Wheel Size: 700c
Whisky Parts Co. No.9 Carbon Mountain Fork 29-inch
$520.00
Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.9 Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough sections for an astoundingly plush ride. The delightfully stiff and compliant UD carbon fiber construction, tapered steerer, and 15mm thru-axle ensure minimal weight and precise handling. It all results in an enhanced riding experience and adds up to performance that you can count on. - Custom DT RWS Skewer included - 3.0" max recommended tire size - Axle to Crown Length: 480mm - Brake Mount: IS Disc Brake 160mm - Crown Race: 40 - Defined Color: Black - Front Axle: 15 x 100mm - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: Tapered - Weight: 750 grams - Wheel Size: 29-inch
Whisky Parts Co. No.9 CX Flat Mount
$520.00
Whisky's No.9 CX Flat Mount is the updated version of the original No.9 CX fork. Building on the precise tracking and braking performance of their original, they've pushed performance even further with this fork. Lighter weight, updated fitment and clean lines make for a supremely capable fork. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x42c/650x47c clearance - Hidden, Removable Fender Mounts
Whisky Parts Co. No.9 Fat Fork Carbon Mountain
$520.00
Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Fat Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough terrain, so you experience an astoundingly plush ride with precise handling. They've accomplished this by using a delightfully stiff and compliant UD carbon fiber construction, a tapered steerer, and a 15 x 150mm thru-axle. It all results in an enhanced riding experience and adds up to performance that you can count on. - Post style brake mount - DT RWS Axle included - UD full carbon construction - Axle to Crown Length: 480mm - Brake Mount: Post Mount 160mm - Crown Race: 40 - Front Axle: 15 x 150mm - Material: Carbon - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: 1-1/8 – 1-1/2-inch tapered - Weight: 750 grams - Wheel Size: 26-inch
Whisky Parts Co. No.9 RD+ Flat Mount
$520.00
Whisky's No.9 RD+ is an all-road fork designed for versatility with abundant tire clearance, up to 700x38c or 650x47c. Hidden and removable fender mounts make this fork all season capable. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x38c/650x47c clearance
RockShox Reba RL 27.5-inch
$500.00
Reba has always signified RockShox quality and performance. Even more so now, with new chassis options that allow Reba to be a frontrunner in any role, from XC to trail riding. With technologies developed on SID, Reba, and Revelation, Reba is the one-stop solution to everyone looking for the unmistakable RockShox performance in a proven package. The Solo Air spring lets you add air to your fork through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously, while Fast Black coating on the upper tubes provides improved durability and decreased friction for buttery smooth operation for the duration. RockShox kindly printed Sag Gradients right on the fork's upper tubes, making perfect suspension setup easy and accurate. And, that perfect spring action is controlled by a Motion Control RL damper with adjustable low speed compression and lockout with blow-off valve, keeping you on track all day long. - Crown Race: 40mm - Offset: 42mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Travel: 100mm - Wheel Size: 27.5" - Maximum Tire Width: 100 x 15mm - 62mm; 110 x 15mm - 81mm
Whisky Parts Co. No. 7 Road Plus Fork
$420.00
The No.7 road fork features full unidirectional carbon construction, available in tapered or straight steerer tubes. - Full unidirectional carbon construction - Mid-Reach Caliper rim brake compatible - 35c max recommended tire size - ASTM Condition 2 - For off-road riding and jumps less than 12" - No rider weight limit - 5 year Whisky warranty - Accommodates road plus tires - Fender mounts
Whisky Parts Co. No.7 Carbon Cantilever Cyclocross Fork
$420.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits and broke new ground during the creation of the No.7 Carbon Cantilever Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using the proven technology of a delightfully stiff and compliant UD carbon fiber construction. It all results in an enhanced riding experience and adds up to performance that you can count on. - Cantilever brakes with 22mm posts - 51mm clearance between fork blades - Includes compression plug - Axle to Crown Length: 392.2 mm - Brake Mount (Fork): Canti Studs - Crown Race: 30 - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48mm - Offset: 45 mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300 mm - Steerer Type: Straight - Wheel Size: 700c
Whisky Parts Co. No.7 Carbon Disc Cyclocross Fork
$420.00
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 392.2mm - Brake Mount (Fork): Post Mount 140mm - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48 - Offset: 47mm - Rotor Size (Fork): 160mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300mm - Wheel Size: 700c
Whisky Parts Co. No.7 Road (12mm Thru-Axle)
$399.00
The Whisky No.7 RD thru-axle fork is a thoroughly modern road fork for road bikes with tapered steerer tubes. It features a 12mm thru-axle for precise handling, clearance for high-volume road tires, and clean internal cable routing. Flat mount brake capability offers clean caliper fitment and backwards compatality with post mount brakes using adaptors.
RockShox 30 Gold RL 27.5-inch
$370.00
Light? Check. Easy to set up? Check. RockShox ride quality? Check. All wheel sizes compatible? Check. Too good to be true? Not if you are referring to the RockShox 30 Gold, now with Motion Control damping. Its SoloAir spring lets you add air to your fork through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously. - Motion Control damping featuring low speed compression adjustment - 30mm Aluminum upper tubes with Fast Black - Crown Race: 30mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - External Adjustments: Rebound Damping, Low Speed Compression Damping - Maximum Tire Width: 58mm - Maximum tire size: 27.5 x 2.4"
Whisky Parts Co. No.7 Road (Quick Release)
$325.00
The Whisky No.7 RD fork is a modern caliper road fork for road bikes with tapered steertubes. Their No.7 RD fork features a standard 9mm x 100mm QR axle. It offers low weight, precise handling, and clearance for 28c tires. This is a perfect upgrade fork for in lieu of a steel or alloy fork, and makes a great replacement fork for existing carbon product.
RockShox Recon Silver TK 26-inch
$250.00
The RockShox Recon Silver: a fork with the performance that'll help you beat your riding buddies without beating up your checking account. Sturdy 32-millimeter stanchions, stiff, forged aluminum crown, and dependable Solo Air spring make Recon Silver the fork you've been looking for. Solo Air lets you add air to your forks through a single Schrader valve, filling both the positive and negative air spring chambers simultaneously, and the Turn Key oil damping system offers external rebound adjustment and compression lockout for on-the-trail adjustability. - PopLoc compatible - 2.4" (62mm) maximum tire width - Crown Race: 30mm - Offset: 40mm - Steerer Tube Length: 265mm - Positive Spring: Air - Negative Spring: Air - Travel: 100mm - Wheel Size: 26" - Stanchion Diameter: 32mm
RockShox 30 Silver TK 26-inch
$170.00
A day of slicing through sweet ribbons of singletrack on a bike sporting a RockShox 30 Silver will leave you smiling all the way to the bank. Race-proven plushness and ease of setup means more time on the trail and less time tinkering. Lightweight and packed full of legendary RockShox technology, the 30 Silver is sure to boost the level of your ride without boosting your wallet in the process. - TurnKey damper - Crown Race: 30mm - Steerer Tube Length: 265mm - Positive Spring: Coil - Negative Spring: Coil - External Adjustments: Rebound Damping, Low Speed Compression Damping - Maximum Tire Width: 62mm - Maximum tire size: 26 x 2.4"
WeThePeople Battleship Fork
$159.99 - $164.99
WeThePeople's Battleship Fork is strong and technical with super thick investment cast dropouts that are designed to be the perfect partner for WTP's most popular frame. - Super short 24mm offset street fork - Invest cast dropouts and fork end, designed to work flawlessly with plastic pegs and hub guards - Incredibly strong design - 7075-T6 alloy top bolt, M24 thread - Tapered, triple butted fork blades - Integrated crown race, designed to work with integrated headsets with a 45-degree bearing
WeThePeople Patrol Fork
$164.99
Built to go fast and high, the Patrol fork by WeThePeople uses 4130 "M2" Chromoly tubing and features CNC machined micro dropouts that perfectly match the dropouts on the Patrol frame. Rounded off with its own 7075 alloy top cap, if you're looking for a strong, dependable fork with classic styling, look no further. - Lightly tapered legs - 7075-T6 alloy top bolt, M24 thread - Integrated crown race, designed to work with integrated headsets with a 45deg bearing *Please Note: WTP does not recommend the use of pegs on the Patrol fork
WeThePeople Utopia Fork
$149.99 - $164.99
Following input from WeThePeople flatland riders Waldemar Fatkin and Dustyn Alt, the Utopia Fork is reborn for 2018 and now features zero degrees of offset to suit technical flatland riders who need a bombproof fork. The smooth tapered legs and extra strong slotted dropout design make this thing the perfect zero offset fork for flatland riders wanting to put their fork through some serious abuse. Available with or without brake mounts depending on what side of the century you started riding. - Full liquid post heat-treatment on 4130 M2 Chromoly - Fully CNC'd steerer, single butted - Integrated crown race designed to work with integrated headsets with a 45° bearing - Laser cut and CNC'd, 5mm, 4130 CrMo, heat-treated for 3/8'' (10mm) axle - 7075-T6 alloy top bolt, M24 thread, 3/8” socket wrench fitment
WeThePeople Utopia Flatland Fork
$161.99
WeThePeople's Utopia range was designed to provide strong reliable products that still have the necessary features to work perfectly for flatland riding, as well as pretty much everything else. • Material: Full-liquid post heat-treatment on 4130 “M2“ chromoly • Steerer Length: 170mm • Offset: 15mm • Dropout: 5mm, laser cut and CNC machined, heat-treated 4130 crmo, 3/8''(10mm) axle • Fully CNCed single butter steerer, integrated crown race designed to work with integrated headsets with a 45° bearing
WeThePeople Message Fork
$159.99
The WeThePeople Message Fork is a super tough, yet elegantly designed fork for park riders looking for a balance between strength and weight. Using a super tapered leg, shorter 28mm offset, and a unique investment cast fork cap, the Message fork comes with a reinforced longer steerer tube allowing you to run a Gyro or your personal choice of spacers to dial in your bike to perfection. - Investment cast fork cap - 7075-T6 alloy top bolt, M24 thread - Integrated crown race, designed to work with integrated headsets with a 45-degree bearing - Full liquid post heat-treatment on 4130 “M2“ CrMo - Fully CNC’d steerer, internally and externally butted
WeThePeople Patron Fork
$139.99 - $159.99
The WeThePeople Patron Fork is all about choices. The 7mm full investment cast, heat-treated hollow dropouts are what make this fork so special. The go-to choice for many of WTP's pro team, the Patron Fork might just be the last fork you ever buy. - Full liquid post heat-treatment on 4130 M2 Chromoly - Fully CNC’d steerer, single butted - Integrated crown race, designed to work with integrated headsets with a 45° bearing - 7mm, full investment cast, 4130 Chromoly, heat-treated, for 3/8''(10mm) axle - 7075-T6 alloy top bolt, M24 thread
WeThePeople Sterling - Pete Sawyer Signature Fork
$159.99
Ground breaking riding deserves a fork so burly fork that it can literally break the ground, should the need arise. WeThePeople's Sterling fork is masterfully crafted to meet the insane demands of team rider, Pete Sawyer. The Sterling can handle it all, and it looks good doing it. Find a matching color scheme on the Sterling signature frames too! • Material: Full-liquid post heat-treatment on 4130 “M2“ chromoly • Steerer Length: 170mm • Offset: 32mm • Dropout: 6mm laser cut & CNC machined, heat-treated 4130 chromoly, 3/8'' axle • Fully CNC’d steerer, single butted integrated crown race designed to work with integrated headsets with a 45° bearing
Odyssey R25 Fork
$134.99 - $154.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. The new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 25mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
Odyssey R32 Fork
$134.99 - $154.99
Odyssey's 41-Thermal forks quickly established a reputation for strength and quality when they originally introduced them in 1999, and they have since gone on to change the standards that all forks are judged by. Their new R-Series forks continue this tradition. FEATURES - Fully redesigned. - Laboratory tested and team proven. - New, custom, seamless, tapered, butted and specially formed leg tube shaping for improved grind and guard clearance. - All-new steerer tube design improves fatigue strength and includes a built-in, integrated, lower headset seat race. - New, optimized, 4mm dropout shape for grind and peg clearance. - Updated 7075-T6 pre-load bolt - Proven 41-Thermal® processed 4130 chromoly - Legendary lifetime replacement warranty SPECS - 32mm traditional offset - 3/8” axle slots only Starting at 1lb 15.2oz (885 grams)
WeThePeople Switch Fork
$149.99
Mike Curly's signature Switch Fork from WeThePeople uses a special slotted dropout design to dramatically strengthen the 6mm thick laser-cut dropout where it's needed the most. Using a smooth tapered leg design and a rounded off fork crown, the Switch fork perfectly matches Mike's effortless blend of riding. - Special slotted dropout design - Smooth underside fork crown - 7075-T6 alloy top bolt, M24 thread - Super short 23mm offset - Integrated crown race designed to work with integrated headsets with a 45º bearing
Page 1 of 2 Next page