Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Other

$7.26
Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts.
- Fits all generations of Reverb

$7.99
Key features:
- Adapter to fit Bontrager Race Lite Ergo Bar Ends to Bontrager Satellite Plus IsoZone Handlebars
- Only compatible with the Bontrager Satellite Plus IsoZone Handlebar
- For most other bar ends, use: Bontrager Satellite Plus IsoZone Bar End Adapter

$7.99
Problem Solvers Bubs Frame Plugs to fill M5 bolt holes in your frame and fork. Replace water bottle and rack mount bolts for a clean look while keeping grit and moisture out of the inside of your frame. Protect your frame bag fabric from abrasion, or just take a little weight off your bike.
- Fits most frame and fork M5 bolt holes
- Shaves weight, saves threads, looks sleek
- 10mm length
- Rubber construction
- Bag of 10

$7.99
The Problem Solvers Cable Pulley is the correct replacement for their Cross Clamp pulley (Cross Clamp sold separately) and it will also work on most frames that have a mount for a pulley. You get the aluminum pulley and the brass bushing.

$7.99 - $10.99
The Problem Solvers Standard Top Cap is a light, durable aluminum top cap for threadless headsets. These caps fit all forks.

$8.00
- Compatible with KMC Half Link chains & Kool Knight chain
- Provides More Strength
- Card of 6 pcs

$8.49
- Use without washers for two chainrings, with washers for one DH ring
- Bolts and nuts use hex keys
- Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers
- Length: 8mm
- Material: Steel
- Type: Hex

$8.99
Keep adhesives off your bike!This is the finishing tape included in our RCT Wrap Kits! If you remove the protective backing and feel the material it feels exactly the same on both sides. There are no adhesives! If you touch it to itself you have just a few seconds to peel it away before it starts to bond. It bonds to itself, but not to your bike or to your components. No more cleanups. No more nasty glue stuck all over your bike or products.

$8.99
- New ultra-slim 2014-T6 aluminum seat clamp with replaceable hardware and self-aligning nut.
- 6061-T6 aluminum construction.
- Standard 1-1/8-inch size.

$8.99
The Problem Solvers Brake Mounting Nut is for front caliper brakes that take recessed fixing nuts. This chrome-plated steel Allen nut comes in 2 long lengths so that it will grip enough threads to tightly fasten the brake on even the thickest of fork crowns.

$8.99
The Problem Solvers Clamp-On Cable Hanger is made of light, durable anodized aluminum and fits on bicycles with 1- and 1 1/8-inch forks. A cable noodle and guide are included.

$8.99 - $17.99
The Problem Solvers Double Chainring Bolts include 5 chainring bolts and nuts that are 8mm wide. This is the right size for most double-chainring setups. These chainring bolts are made of either aluminum, stainless steel, or chromoly.

$9.95
This stem cap is where your bike fashion sense and the weight weenie in you collide. This Ultralight and ultra-sleek stem cap integrates a 5mm, 10mm or 15mm headset spacer with your stem cap in finely machined piece. Why have extra steerer tube requiring spacers on top of your stem you ask? Well, many carbon steerers require that the steer tube extend above the stem. Also, riders may want the flexibility to move handlebar height up and down for different types of riding or for bike re-sale.
- Design and manufactured in Minneapolis, MN USA
- 1 1/8" top (straight 1 1/8" or 1 1/2" to 1 1/8" taper) steerer tubes only
- 6061-T6 aluminum
- 5mm internal cylinder wall height
- Black aluminum bolt included
Total weight (cap + bolt): 5mm= 12g. Compare to a standard flat stem cap and steel bolt at 20 grams + spacers add even more.

$9.99
Customizable insert to create a lower stopping position for those who do not fully extend their seat post. Comes with full instructions.
Tools required:
- Scissors
- 5mm Allen key

$9.99
Dimension Basic Track Cog Lockring with 1.29-inch x 24 tpi left-hand thread.
- Stainless steel
- Fits all but Campagnolo and Miche hubs
- Not compatible with Phil Wood hubs

$9.99
Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.

$9.99 - $10.99
This kit includes a Greenfield center-mounted kickstand as well as a mounting plate that's designed with a cutaway to clear derailleur cables. The kickstand is lightweight, durable, and looks great on any bike. It's made of aluminum and made in the USA.
- 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over)
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- Non-Slip Clamping Surface

$9.99 - $14.99
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes!
- 285mm (for bikes 22" and under), 305mm (for bikes 22" and over)
- For bikes without factory mounting plate (includes top plate and bolt)
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- Non-Slip Clamping Surface

$9.99 - $10.99
The Greenfield KS3 is a center-mounted kickstand. It's lightweight, durable, and looks great on any bike. The kickstand is constructed from aluminum and made in the USA.
- For bikes with a factory mounting plate (includes bolt)
- 285 mm (for bikes 22" and under), 305 mm (for bikes 22" and over)
- Certified Non-Corrosive Casting
- Snap Action Mechanism
- Non-Slip Clamping Surface

$9.99 - $13.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

$9.99 - $10.99
Problem Solvers has a couple different options for adding cable housing or brake hose guides to your bike. Choose from the adhesive stick-on option or the guide that mounts to existing housing stops.